1 2

Neo VQS Advanced Pack (VZ Chassis)

Neo VQS Advanced Pack (VZ Chassis)

LE 1,820.00 EGP
LE 1,820.00 EGP
Sale Sold out
Shipping calculated at checkout.

【Special version with many selected parts】

This is a special kit which features stylish body and a lively drive with useful tune-up parts. The body is molded in smoke-color, and VZ Chassis is coordinated with black and clear yellow. Dedicated metallic stickers are also included. A host of parts for a highly tuned car include a light-dash motor, FRP front wide plate and rear brake stay for setup of brakes and stabilizer balls. Mass dampers and super hard and small-diameter low-profile tires help improve your chances of finishing the race. Also, this model features hollow propeller shaft, high speed EX counter gears, and tough carbon-reinforced plastic gears. This model is highly recommended for racers who want to power up the NEO-VQS.

【VZ Chassis】

The VZ chassis is a compact and lightweight design that features reinforced designs for bumper, rear stay base and more ensuring that it has the durability and flexibility to withstand racing accidents. It is also a rather adaptable unit that lets its owner make numerous updates to the setup. Low friction 620 plastic bearings are molded in POM and maximize drive efficiency, while the chassis and A parts are molded in ABS. 3.7:1 gears are included.

【Tune-Up Parts (included)】

15455 Light-Dash Motor / Light-Dash 摩打 Light-Dash Motor is easy to handle with intermediate power between Atomic-Tuned Motor and Hyper Dash 3 Motor. 介乎於Atomic-Tuned摩打和Hyper Dash 3摩打的性能使其易於上手。

 

15455 Light-Dash Motor / Light-Dash 摩打

Light-Dash Motor is easy to handle with intermediate power between Atomic-Tuned Motor and Hyper Dash 3 Motor.


 


15451 FRP Front Wide Plates / FRP 前置防撞桿 The roller mounting position expands to the full specified width, greatly enhancing the stability of the machine. 把導輪的裝設位置擴闊到規定的最大幅度，大幅提升車輛穩定性。

 

15451 FRP Front Wide Plates / FRP

The roller mounting position expands to the full specified width, greatly enhancing the stability of the machine.

 


15205 1.4mm Hollow Propeller Shaft / 1.4mm 中空傳動軸 About half the weight of the shaft that comes with the kit. Produces smooth rotation and enhances drive efficiency. 比一般版本附屬的傳動軸輕了約一半，可以透過順滑的回轉提高傳動效率。

 

15205 1.4mm Hollow Propeller Shaft / 1.4mm 中空傳動軸

About half the weight of the shaft that comes with the kit. Produces smooth rotation and enhances drive efficiency.

 


15462 Carbon-Reinforced G13 Gear & 8T Pinion / 碳纖維強化齒輪 G13．8T摩打齒輪 High-strength carbon fiber mixed resin gear. Strong against impacts such as falls, and reliably transmits power. 高強度的碳纖維配合樹脂製齒輪。耐衝擊並能確實傳導動力。

 

15462 Carbon-Reinforced G13 Gear & 8T Pinion / 碳纖維強化齒輪 G13．8T摩打齒輪

High-strength carbon fiber mixed resin gear. Strong against impacts such as falls, and reliably transmits power.

 


15434 High Speed EX Counter Gears (3.7:1) / 高速EX減速齒輪 (3.7:1) It can be set to an intermediate gear ratio (3.7:1) between high-speed gear and super-speed gear, and has better acceleration than super-speed gear and is effective on technical courses. 3.7:1的齒輪比位於高速齒輪和超速齒輪之間，比起超速齒輪更能於技術型賽道發揮效果。

 

15434 High Speed EX Counter Gears (3.7:1) / (3.7:1)

It can be set to an intermediate gear ratio (3.7:1) between high-speed gear and super-speed gear, and has better acceleration than super-speed gear and is effective on technical courses.

 


Super Hard Small Diameter Low-Profile Tires (Black) / 超硬細徑薄胎 (黑色) Small diameter low-profile tire that can set the center of gravity low. Equipped with a super hard type that makes it difficult for the machine to bounce. 細徑薄胎能夠降低車輛重心，超硬輪胎就能減少車輛彈跳。

 

Super Hard Small Diameter Low-Profile Tires (Black) 

Small diameter low-profile tire that can set the center of gravity low. Equipped with a super hard type that makes it difficult for the machine to bounce.

 


15459 Side Mass Damper Set / 側翼制震鉛塊 Increases the landing stability of the machine. Four cylinders are installed in the center and rear of the car. 增加車輛的著地安定性。圓柱型鉛塊裝設於車輛的中央及後方4個位置。

 

15459 Side Mass Damper Set 

Increases the landing stability of the machine. Four cylinders are installed in the center and rear of the car.

 


15242 FRP Reinforcing Plates (x2) / FRP 多用途強化片 Use the FRP plate as a stay to attach the brake. In addition, even when the machine rides on the fence, the end face of the plate slides on the edge of the fence and helps return to the course. 把FRP用作制動器的連接支架。同時當車輛架了在圍欄上的時候可以幫助車輛回歸賽道。

 

15242 FRP Reinforcing Plates (x2) / FRP

Use the FRP plate as a stay to attach the brake. In addition, even when the machine rides on the fence, the end face of the plate slides on the edge of the fence and helps return to the course.

 


15518 FRP Rear Brake Stay / FRP 後置制動器 By using 15512 brake sponge (blue) with weak friction force in the front and rear, and setting 15492 brake sponge (white) with strong braking force at a slightly higher position, the braking effect in the target section is demonstrated. A wide range of settings is achieved by combining 3 FRP plates. 於前後使用摩擦力較弱的 15512 制動海綿(藍色)，再於較高的位置裝設摩擦力強的 15492 制動海綿(白色)，令到於不同路段可以發揮不同效果。透過3塊FRP片可以造出多種的配搭。

 

15518 FRP Rear Brake Stay / FRP

By using 15512 brake sponge (blue) with weak friction force in the front and rear, and setting 15492 brake sponge (white) with strong braking force at a slightly higher position, the braking effect in the target section is demonstrated. A wide range of settings is achieved by combining 3 FRP plates.


13mm Low-Friction Plastic Rollers (x6) / 13mm 低摩擦塑膠導輪 (x6) Low-friction roller that uses POM resin, which has low friction resistance and high strength, and is lighter than aluminum bearing rollers. Place 2 on the front and 4 on the rear to improve the cornering performance of the machine. 採用低摩擦高強度的POM樹脂製，比起鋁合金滾珠軸承導輪更輕量。前置2個﹑後置4個強化車輛的入彎性能。

 

13mm Low-Friction Plastic Rollers (x6) / 13mm  (x6)

Low-friction roller that uses POM resin, which has low friction resistance and high strength, and is lighter than aluminum bearing rollers. Place 2 on the front and 4 on the rear to improve the cornering performance of the machine.

 


15454 2mm Cap Screws (25mm x2, 30mm x2) / 2mm 有頭螺絲 (25mm x2, 30mm x2) Cap screws with about 1.5 times the bending strength of normal stainless steel screws are used on the front and rear roller shafts. Although it has a long shaft, it is also durable enough to not bend even when going off the course. 比普通不鏽鋼螺絲有著1.5倍防彎曲強度，用於前後的導輪軸上可以防止於彈跳或飛出賽道時撞彎。

 

15454 2mm Cap Screws (25mm x2, 30mm x2) / 2mm (25mm x2, 30mm x2)

Cap screws with about 1.5 times the bending strength of normal stainless steel screws are used on the front and rear roller shafts. Although it has a long shaft, it is also durable enough to not bend even when going off the course.

 


【Specifications】

  • Length: 159mm Width: 104mm Height: 43mm
  • Includes motor
  • ABS body (smoke)
  • VZ Chassis = ABS (black), A parts=low friction resin (clear yellow)
  • Super hard and small-diameter low-profile tires (black)
  • A-spoke wheels (yellow)
  • Gear ratio = 3.7：1
  • Includes metallic stickers
  • Easy snap-together and screw-attachment assembly

【Separately Required Items】

  • R6/AA/UM3 batteries x2
View full details